Blog

Arkansas home window installation

Why Your Contractor’s Home Window Installation Technique Matters

Arkansas home window installation: It might be your window to the outside world, but can you trust the glass? Find out why proper window installation technique matters for your home.

Arkansas home window installation

Before you hire someone to install a window in your home, it is a good idea to look into what the job entails. A poorly installed window can mean major air leaks that can run up your utility bill or increase noise or insect infestation. Here are a few strategies to ensure that in Arkansas, home window installation is being done correctly.

There are a few things that you can do to ensure that the windows in your home are being installed properly. Namely: be educated, be aware, and hire the right home window installer in Arkansas.

Your Window on the World

A window might seem simple and impenetrable as you stand in your warm and comfortable home, but face the facts: it is a hole in a wall, and as such is vulnerable to certain outside threats. The biggest threat to your windows is leaking air that can wreak havoc on your utility bill. You may unsuccessfully attempt to maintain a steady temperature while your air conditioning leaks out or the cold air seeps in to your nicely heated room.

When you are going to put a new hole in your home with a new window installation, or replace an existing window, there are certain precautions that must be taken. Unfortunately, there are some who move forward with window installation and pay no heed to the insulation and wrapping techniques that are designed to keep your home safe.

Proper window installation is a precise job. This means every detail matters. Here are a few tips that you can use to ensure your windows are installed correctly:

  • Prepare the opening. To make sure that you are going to have a window that is airtight and will not contribute to leaking, weatherproofing needs to occur at the very start. When the house wrap is cut, the bottom flap should be tucked down into the house and sill flashing should be installed immediately. The side flaps should be folded in, as well, leaving only the top flap out.
  • Reinforce sill flashing. The wrap is tucked in and the flashing is installed right away, but you still need to reinforce your work. Sill flashing should be glued and nailed. This will ensure that it withstands moisture and remains intact despite pressure from the elements.
  • Place the window. Caulk the window according to manufacturer guidelines, setting the window into the opening and making sure the sill is level. Nail the window into place before the caulk dries.
  • Insulate. To protect against drafts, utilize fiberglass insulation or spray foam around the window.
  • Seal. One of the primary reasons that windows will start to leak is drainage issues from the siding that causes moisture to build up and deteriorate the window frame. Make sure that the entire perimeter of the window is sealed and that flashing tape goes over the nailing flanges. An experienced and well-trained window installer will know how best to finish the job with flashing.

The right technique can mean the difference between a reliable window and a money pit. Make sure you make the right call when you need windows installed. Contact SC Home–Roofing, Windows & Siding to request a quote for window installation and rest assured that you will receive the best customer service in Arkansas.

Free home improvement estimate

Post your comment